{"id":3389,"date":"2026-10-08T09:00:00","date_gmt":"2026-10-08T01:00:00","guid":{"rendered":"https:\/\/www.polive3d.com\/?p=3389"},"modified":"2026-11-09T11:37:06","modified_gmt":"2026-11-09T03:37:06","slug":"%e4%bb%80%e4%b9%88%e6%98%af%e8%a1%a8%e9%9d%a2%e8%83%bd%ef%bc%9f%e4%b8%ba%e4%bb%80%e4%b9%88-pp-%e7%9a%84%e4%bd%8e%e8%a1%a8%e9%9d%a2%e8%83%bd%e8%ae%a9%e6%89%93%e5%8d%b0%e5%8f%98%e9%9a%be","status":"publish","type":"post","link":"https:\/\/www.polive3d.com\/en\/%e4%bb%80%e4%b9%88%e6%98%af%e8%a1%a8%e9%9d%a2%e8%83%bd%ef%bc%9f%e4%b8%ba%e4%bb%80%e4%b9%88-pp-%e7%9a%84%e4%bd%8e%e8%a1%a8%e9%9d%a2%e8%83%bd%e8%ae%a9%e6%89%93%e5%8d%b0%e5%8f%98%e9%9a%be\/","title":{"rendered":"What Is Surface Energy? Why PP's Low Surface Energy Makes Printing Difficult"},"content":{"rendered":"<h2 class=\"wp-block-heading\"><strong>What Is Surface Energy? Why PP&#8217;s Low Surface Energy Makes Printing Difficult<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Surface Energy is an important physical concept describing a solid surface&#8217;s ability to interact with other substances, usually expressed in <strong>mN\/m<\/strong>&nbsp;.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">PP is a typical low-surface-energy material. Common data are roughly around <strong>29\u201331 mN\/m<\/strong>&nbsp;.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For 3D printing, this means it may be difficult to form good wetting and adhesion between molten PP and the print bed; in post-processing, bonding between PP and ordinary adhesives or coatings may also be difficult.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Therefore, several common problems in PP printing\u00e2\u0080\u0094<strong>weak first-layer adhesion, warping, and difficult post-processing bonding<\/strong>\u00e2\u0080\u0094are all related to PP&#8217;s surface characteristics.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">However, it should be noted that surface energy is not the only factor affecting adhesion. Bed material, surface cleanliness, temperature, contact area, and the material&#8217;s own formulation all affect the final adhesion performance.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>What is surface energy?<\/strong><strong><\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Simply put, surface energy helps us understand:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>how easily one material&#8217;s surface interacts with another material.<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For example, placing a drop of water on a solid surface:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>If the water spreads easily, it usually indicates stronger interaction between the liquid and the surface;<\/li>\n\n\n\n<li>if the water remains a relatively obvious spherical shape, it usually indicates poor wetting.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">This phenomenon can be observed through the<strong>contact angle<\/strong>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Generally speaking:<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>High-surface-energy materials<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">such as glass and some metal surfaces, where liquids usually spread more easily and the contact angle is relatively small.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Low-surface-energy materials<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">such as PP and PE, where liquids more easily remain contracted and the contact angle is usually larger.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Therefore, surface energy is an important reference factor when judging whether a material is easily wetted by glue, coating, or molten plastic.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">However,<strong>Surface energy should not be simply understood as &#8220;surface stickiness&#8221;<\/strong>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It is not directly equal to the final bond strength, but is one of the important factors affecting wetting and interfacial interaction.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>How low is PP&#8217;s surface energy?<\/strong><strong><\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">PP&#8217;s surface energy is usually at a relatively low level.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Common materials can be roughly compared:<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><td><strong>Material<\/strong><strong><\/strong><\/td><td><strong>Approximate surface-energy level<\/strong><strong><\/strong><\/td><\/tr><tr><td>Glass, some metals<\/td><td>Higher<\/td><\/tr><tr><td>ABS, PC<\/td><td>Usually higher than PP<\/td><\/tr><tr><td><strong>PP<\/strong><\/td><td><strong>About 29-31 mN\/m<\/strong><\/td><\/tr><tr><td>PE<\/td><td>Also usually a low-surface-energy material<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Specific values are affected by factors such as material grade, surface condition, test method, and surface contamination, so these data are more suitable as a reference for understanding material differences rather than as absolute fixed values.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For PP, low surface energy means a very practical problem:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Many common adhesives and coatings do not easily form good wetting and bonding on PP surfaces.<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This is also one of the reasons PP is called a &#8220;difficult-to-bond material.&#8221;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For <strong>POLIVE PPpro\u2122<\/strong>, and the actual bed adhesion performance still needs to be tested in combination with the specific print bed, printing parameters, and material formulation.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>PPpro\u00e2\u0084\u00a2 bed adhesion test results: data to be added<\/strong><\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Why does low surface energy make PP printing difficult?<\/strong><strong><\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">In FDM 3D printing, the first layer needs to go through a very critical process:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Molten material \u00e2\u0086\u0092 contacts the print bed \u00e2\u0086\u0092 spreads \u00e2\u0086\u0092 cools \u00e2\u0086\u0092 sets<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If the molten material cannot wet the bed surface well, the actual contact area may be affected.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This further affects first-layer adhesion.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>1. The first layer easily fails to stick<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">If the wetting and interfacial bonding between the PP melt and the bed are insufficient, the edges of the print are more likely to experience:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>First-layer detachment<\/li>\n\n\n\n<li>Corner lifting<\/li>\n\n\n\n<li>Long-edge deformation<\/li>\n\n\n\n<li>Local detachment of large flat areas<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">For large flat parts and elongated parts, this problem is usually more pronounced.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>2. Low surface energy and PP shrinkage act together<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">PP itself is a semi-crystalline material that shrinks during cooling.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If the adhesion between the first layer and the bed is insufficient, and the print also has noticeable shrinkage, the following process may form:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>cooling shrinkage \u00e2\u0086\u0092 internal stress \u00e2\u0086\u0092 edges lift up \u00e2\u0086\u0092 bed adhesion further decreases<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Therefore, PP&#8217;s warping problem cannot be simply attributed to &#8220;insufficient temperature.&#8221;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It is often:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>material shrinkage + surface energy + bed adhesion + temperature and cooling<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">acting together.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>3. Post-processing is also affected<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">PP&#8217;s low surface energy affects not only the printing process but also the treatment after printing.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For example:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Spray painting<\/li>\n\n\n\n<li>Coating<\/li>\n\n\n\n<li>Bonding<\/li>\n\n\n\n<li>Labeling<\/li>\n\n\n\n<li>Compositing with other materials<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">If ordinary glue or ordinary coating is used directly, problems such as insufficient wetting and low adhesion may occur.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Therefore, when post-processing PP prints, it is usually necessary to consider surface treatment methods and adhesive systems specifically for PP.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Which prints are more easily affected?<\/strong><strong><\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Not all PP prints exhibit the same degree of adhesion problems.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The following types of structures are usually more sensitive:<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Large flat areas<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The larger the printing area, the more pronounced the cumulative effect of cooling shrinkage may be.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Elongated structures<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Long edges are prone to producing noticeable shrinkage stress during cooling.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Sharp-corner structures<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Sharp-corner positions usually lift more easily from the bed edge.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Thin-wall structures<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The heat dissipation speed and temperature changes of thin-wall structures may differ from those of solid structures, so they need to be considered separately.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">In contrast, small parts, parts with a smaller bottom area, or models that use <strong>Brim<\/strong>&nbsp;a model that increases contact area are usually easier to control.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>How to deal with PP&#8217;s low surface energy?<\/strong><strong><\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">In practical engineering, it is usually not relying on a single method, but combining different solutions according to the application scenario.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>1. Choose a suitable print bed<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Different bed surfaces show different adhesion performance for PP.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">You can choose a bed surface designed for PP or low-surface-energy materials, while combining:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Brim<\/li>\n\n\n\n<li>Raft<\/li>\n\n\n\n<li>Appropriate first-layer settings<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">This increases the actual contact area and improves first-layer stability.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>2. Keep the print surface clean<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Oil, dust, and other contaminants on the bed affect the actual interfacial condition.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Therefore, keeping the bed clean before printing is very important.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">At the same time, avoid exposing the filament to environments where it can easily pick up dust and oil over the long term.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Note:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Cleaning does not necessarily solve PP&#8217;s adhesion problem.<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It only ensures the bed is in a more stable baseline state.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>3. Perform surface activation<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">For PP surfaces that need bonding or coating, surface activity can be improved through some surface treatment methods.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Common methods include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Flame treatment<\/li>\n\n\n\n<li>Corona treatment<\/li>\n\n\n\n<li>Plasma treatment<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">These methods can change the state of the PP surface and improve its interaction with adhesives or coatings.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">However, the surface activation effect is not permanent.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The treated PP surface may change again over time, so subsequent processes usually need to be carried out as soon as possible after treatment.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>4. Use adhesives or primers suitable for PP<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">If you need to bond PP prints, ordinary glue is not necessarily suitable.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Bonding systems for PP usually use:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>PP-specific adhesive<\/li>\n\n\n\n<li>Primer<\/li>\n\n\n\n<li>Matching surface treatment<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">The specific choice needs to be based on:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>PP formulation + bonded material + usage environment + loading mode<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">for testing.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For structural parts, the actual bond strength should be the ultimate focus, rather than just looking at whether the product name says &#8220;suitable for PP.&#8221;<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>5. Improve from the material side<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Besides changing the print bed and post-processing techniques, you can also start from the material itself.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For modified PP specifically for FDM 3D printing, the formulation design can target:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Wetting behavior<\/li>\n\n\n\n<li>Platform attachment<\/li>\n\n\n\n<li>Shrinkage behavior<\/li>\n\n\n\n<li>Melt flow<\/li>\n\n\n\n<li>Interlayer bonding<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">for adjustment.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>POLIVE PPpro\u2122<\/strong>&nbsp;is a modified PP filament developed for the PP FDM 3D printing scenario.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Its approach is not simply to turn ordinary PP into filament, but to improve PP&#8217;s processing performance in FDM printing from the perspective of matching material formulation with the printing process.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>What is the relationship between surface energy and printing temperature?<\/strong><strong><\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Surface energy and temperature are two different concepts, but they jointly affect printing adhesion.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">When the temperature rises, the fluidity of molten PP usually changes, thereby affecting how the material spreads on the bed.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Therefore, when optimizing printing parameters, you can pay attention to:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Material temperature \u00e2\u0086\u0092 melt flow<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Bed temperature \u00e2\u0086\u0092 bottom cooling<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Surface condition \u00e2\u0086\u0092 wetting and interfacial bonding<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">But do not attribute all adhesion problems to temperature.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If the bed surface itself is not suitable for PP, even continuously raising the heat-bed temperature may not achieve ideal adhesion.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>What does surface energy ultimately tell us?<\/strong><strong><\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Understanding PP&#8217;s surface energy, the most important significance is not to memorize a <strong>29\u201331 mN\/m<\/strong>&nbsp;number.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">What really matters is understanding:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>PP&#8217;s low surface energy is one of the important reasons it is difficult to wet and bond.<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This can explain why PP often requires special attention to first-layer adhesion in FDM printing, and also why PP prints usually require additional surface treatment in subsequent coating, bonding, and compositing processes.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">When you encounter PP print warping, first-layer detachment, or poor post-processing bonding, you can troubleshoot step by step from the following directions:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Bed \u00e2\u0086\u0092 surface cleaning \u00e2\u0086\u0092 temperature \u00e2\u0086\u0092 cooling \u00e2\u0086\u0092 contact area \u00e2\u0086\u0092 material formulation<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">rather than adjusting only one parameter.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Summary<\/strong><strong><\/strong><\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li>PP is a typical<strong>Low-surface-energy materials<\/strong>, with common surface-energy data approximately <strong>29\u201331 mN\/m<\/strong>.<\/li>\n\n\n\n<li>Low surface energy affects the wetting and adhesion of molten PP to the print bed.<\/li>\n\n\n\n<li>PP&#8217;s low surface energy is also one of the important reasons its subsequent coating and bonding are relatively difficult.<\/li>\n\n\n\n<li>PP warping is usually not caused by a single factor, but is the result of the combined action of shrinkage, bed adhesion, temperature, and cooling.<\/li>\n\n\n\n<li>A suitable bed, Brim\/Raft, a clean surface, and PP-specific surface treatment can all serve as improvement measures.<\/li>\n\n\n\n<li>Surface activation methods such as flame, corona, and plasma treatment can be used to improve the processability of PP surfaces, but the effect changes over time.<\/li>\n\n\n\n<li>For FDM 3D printing, PP&#8217;s wetting and adhesion performance can also be improved from the material formulation side.<\/li>\n\n\n\n<li><strong>POLIVE PPpro\u2122<\/strong>&nbsp;a material designed for adhesion, shrinkage, and processing stability in PP FDM printing.<\/li>\n<\/ul>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n<div id=\"rank-math-faq\" class=\"rank-math-block\">\n<div class=\"rank-math-list\">\n<div id=\"faq-question-polive-3389-1\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\">What Is Surface Energy, and Why Is PP's So Low?<\/h3>\n<div class=\"rank-math-answer\">\n\n<p>Surface energy describes how readily a solid surface interacts with other substances, and is usually expressed in mN\/m. PP's molecular chains contain only carbon and hydrogen and have very low polarity, making it a low-surface-energy material \u2014 so adhesives, coatings and most build plates do not wet it easily.<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-polive-3389-2\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\">How Does Low Surface Energy Make PP Hard to Print?<\/h3>\n<div class=\"rank-math-answer\">\n\n<p>The most direct consequence is poor first-layer adhesion; combined with semi-crystalline shrinkage, corners lift more easily. Gluing and painting in post-processing are affected too. This is a material property, not a tuning mistake.<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-polive-3389-3\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\">Without a Heated Bed, What Makes the First Layer Stick?<\/h3>\n<div class=\"rank-math-answer\">\n\n<p>A dedicated adhesive, not temperature. Coat the build plate with a thin layer of PPLOCK26811, let it dry for a few minutes and print directly on it; one application lasts for multiple prints and cleaning is a wipe with alcohol. Add a brim for support and even an entry-level open-frame machine stays reliable.<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-polive-3389-4\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\">Does Low Surface Energy Have Any Upside?<\/h3>\n<div class=\"rank-math-answer\">\n\n<p>Yes. It resists staining, stands up to chemical wiping and repels water, which actually makes containers and chemical-related parts perform better. The same property that is a nuisance for adhesion becomes an advantage in service.<\/p>\n\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\"><strong>Related Reading<\/strong><strong><\/strong><\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li>How to Prevent PP Warping? How to Choose Between Brim, Raft, and Skirt<\/li>\n\n\n\n<li>PP \u6253\u5370\u4ef6\u80fd\u7c98\u63a5\u5417\uff1fPP \u80f6\u6c34\u9009\u62e9\u4e0e\u8868\u9762\u5904\u7406<\/li>\n\n\n\n<li>\u4e3a\u4ec0\u4e48 PP \u4ee5\u524d\u8fd9\u4e48\u96be\u6253\uff1f\u6536\u7f29\u3001\u7fd8\u8fb9\u3001\u7c98\u4e0d\u4f4f\u7684\u4e09\u5927\u96be\u9898<\/li>\n\n\n\n<li>What Print Bed Should Be Used for PP 3D Printing? A Comparison of Common Bed Materials<\/li>\n\n\n\n<li><\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>","protected":false},"excerpt":{"rendered":"<p>What Is Surface Energy? Why PP&#8217;s Low Surface Energy Makes Printing Difficult Surface Energy is an important physical concept describing a solid surface&#8217;s ability to interact with other sub &#8230; <a title=\"What Is Surface Energy? Why PP&#039;s Low Surface Energy Makes Printing Difficult\" class=\"read-more\" href=\"https:\/\/www.polive3d.com\/en\/%e4%bb%80%e4%b9%88%e6%98%af%e8%a1%a8%e9%9d%a2%e8%83%bd%ef%bc%9f%e4%b8%ba%e4%bb%80%e4%b9%88-pp-%e7%9a%84%e4%bd%8e%e8%a1%a8%e9%9d%a2%e8%83%bd%e8%ae%a9%e6%89%93%e5%8d%b0%e5%8f%98%e9%9a%be\/\" aria-label=\"Read more about \u4ec0\u4e48\u662f\u8868\u9762\u80fd\uff1f\u4e3a\u4ec0\u4e48 PP \u7684\u4f4e\u8868\u9762\u80fd\u8ba9\u6253\u5370\u53d8\u96be\">Read more<\/a><\/p>","protected":false},"author":1,"featured_media":3392,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[35],"tags":[123,67,127,124,125,126],"class_list":["post-3389","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-35","tag-polypropylene-low-surface-energy","tag-pppro-2","tag-pp","tag-surface-energy-pp","tag-126","infinite-scroll-item","generate-columns","tablet-grid-50","mobile-grid-100","grid-parent","grid-33"],"_links":{"self":[{"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/posts\/3389","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/comments?post=3389"}],"version-history":[{"count":4,"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/posts\/3389\/revisions"}],"predecessor-version":[{"id":3892,"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/posts\/3389\/revisions\/3892"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/media\/3392"}],"wp:attachment":[{"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/media?parent=3389"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/categories?post=3389"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/tags?post=3389"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}