{"id":3393,"date":"2026-10-08T00:05:00","date_gmt":"2026-10-07T16:05:00","guid":{"rendered":"https:\/\/www.polive3d.com\/?p=3393"},"modified":"2026-11-09T11:37:08","modified_gmt":"2026-11-09T03:37:08","slug":"3393","status":"publish","type":"post","link":"https:\/\/www.polive3d.com\/en\/3393\/","title":{"rendered":"Does PP Absorb Water? Moisture Absorption of PP Filament and Prints"},"content":{"rendered":"<h2 class=\"wp-block-heading\"><strong>Does PP Absorb Water? Moisture Absorption of PP Filament and Prints<\/strong><strong><\/strong><\/h2>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<p class=\"wp-block-paragraph\">PP is a<strong>polymer with very low moisture absorption<\/strong>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Because PP&#8217;s molecular structure has relatively low polarity, water molecules do not easily enter the material interior, so PP&#8217;s water absorption rate is usually very low. For FDM 3D printing, this means PP filament usually does not, like highly moisture-absorbing materials such as nylon, require frequent dedicated drying treatment.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">But it should be noted that:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>A low water absorption rate of PP does not mean PP filament can completely ignore its storage environment.<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Factors such as dust, oil, surface water films, as well as high temperature and sunlight, can still affect the actual performance of the filament.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Therefore, understanding PP&#8217;s moisture-absorption characteristics also helps determine whether a printing anomaly is actually caused by &#8220;moisture exposure.&#8221;<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>How low is PP&#8217;s water absorption?<\/strong><strong><\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">PP is a non-polar polymer whose molecular structure has low affinity for water molecules, so moisture does not easily enter the material interior.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">In common references, PP&#8217;s 24-hour water absorption rate is usually at a very low level, for example below <strong>0.03%<\/strong>. The specific value varies depending on material grade, test method, and test conditions.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Compared with engineering plastics such as nylon that have significantly higher moisture absorption, PP&#8217;s moisture-absorption behavior is very different.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For FDM 3D printing, this means:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>PP filament usually does not need to be dried as frequently as nylon;<\/li>\n\n\n\n<li>under normal environments, the moisture-change of PP filament is usually small;<\/li>\n\n\n\n<li>even after long exposure to humid environments, PP does not necessarily absorb moisture as noticeably as nylon.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">However, this does not mean all PP filaments require no drying treatment under any circumstances.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Whether drying is specifically needed should also be determined by combining<strong>material formulation, storage conditions, and actual printing performance<\/strong>for judgment.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Printing problems with PP filament are not necessarily due to &#8220;moisture exposure&#8221;<\/strong><strong><\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">This is a misconception that easily arises when using PP filament.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For highly moisture-absorbing materials such as nylon, if bubbles, crackling sounds, or surface anomalies appear during printing, moisture is usually an important direction to investigate.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">But for PP, humidity is often not the first thing to investigate.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Bubbles or abnormal sounds during extrusion<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">If bubbles or abnormal sounds appear during extrusion, you can first check:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>whether there is a water film on the filament surface;<\/li>\n\n\n\n<li>whether it is contaminated with oil;<\/li>\n\n\n\n<li>whether there are impurities in the material path;<\/li>\n\n\n\n<li>whether the nozzle and extrusion system are normal.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Do not conclude &#8220;PP is moist&#8221; based solely on bubbles.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Stringing and drooping<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">When PP printing shows stringing or drooping, you should prioritize checking:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Nozzle temperature<\/li>\n\n\n\n<li>Return to the settings<\/li>\n\n\n\n<li>Print speed<\/li>\n\n\n\n<li>Material flowability<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">These issues are not necessarily related to moisture absorption.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Poor extrusion<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">If extrusion is unstable or material feeding is difficult, you can prioritize checking:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>whether the nozzle is clogged;<\/li>\n\n\n\n<li>whether the nozzle is worn;<\/li>\n\n\n\n<li>whether the feeding mechanism is normal;<\/li>\n\n\n\n<li>whether there is resistance in the material path;<\/li>\n\n\n\n<li>whether the printing temperature is appropriate.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Therefore, the troubleshooting order for PP printing anomalies can usually differ from that for nylon:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>First check the mechanical state and printing parameters, then consider humidity factors.<\/strong><\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>How do PP prints perform in water environments?<\/strong><strong><\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">PP itself has low water absorption, so PP prints usually have good dimensional stability in general water environments.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Not easily gaining noticeable weight from water absorption<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">PP&#8217;s absorption of water is very limited, so after long-term contact with water, the weight and dimensions of the print usually do not change noticeably due to water absorption.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Good tolerance to common water environments<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">PP can usually cope well with general water environments and also has good resistance to various chemical media.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">But here special attention is needed:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>&#8220;Water-resistant&#8221; does not equal &#8220;completely unaffected in any water environment.&#8221;<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The actual performance is also affected by:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Water temperature<\/li>\n\n\n\n<li>Contact time<\/li>\n\n\n\n<li>Other media in water<\/li>\n\n\n\n<li>Material formulation<\/li>\n\n\n\n<li>Internal stress of the part<\/li>\n\n\n\n<li>Part structure<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">and other factors.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If food contact or drinking-water use is involved, it still needs to be confirmed based on specific regulations, material compliance documents, and actual test results.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Will a PP print&#8217;s dimensions change when placed in water?<\/strong><strong><\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">If a PP print is used in a water-related environment, moisture absorption is usually not the main source of dimensional change.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">In comparison,<strong>temperature changes are often more worth paying attention to<\/strong>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For example, when a print enters a higher-temperature water environment from room temperature, the material undergoes thermal expansion; after the temperature drops, it undergoes corresponding contraction.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Therefore, if a PP print is a part that requires precise fit, such as:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Snaps<\/li>\n\n\n\n<li>Bushings<\/li>\n\n\n\n<li>Container lids<\/li>\n\n\n\n<li>Sealing structures<\/li>\n\n\n\n<li>Mating parts<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">When designing dimensions, you need to consider the actual operating temperature, not just whether the material absorbs water.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>How should PP filament be stored?<\/strong><strong><\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Although PP&#8217;s moisture absorption is very low, good storage habits are still worth maintaining.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>1. Dust and contamination prevention<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">For FDM printing filament, dust entering the feeding system or nozzle can cause problems.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Therefore, PP filament is best stored in:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Sealed bags<\/li>\n\n\n\n<li>Sealed boxes<\/li>\n\n\n\n<li>Lidded storage boxes<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">for storage.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The main purpose of this is not only moisture prevention, but also to reduce dust and other contaminants entering the printing system.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>2. Avoid prolonged sun exposure and high temperatures<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">PP itself has good heat resistance, but long-term exposure to high-temperature or direct-sunlight environments can still accelerate material aging.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Therefore, it is recommended to store filament:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>away from light, at room temperature, and clean.<\/strong><\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>3. Desiccant is not a necessity for PP<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">For PP, desiccant is usually not a necessity like it is for nylon consumables.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">But if you use a sealed box to store filament, placing an appropriate amount of desiccant can serve as an auxiliary measure.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Especially in environments with large day-night temperature differences, controlling the humidity in the storage environment helps reduce condensation risk.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>4. Mark the opening time<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">If you use multiple spools of filament at the same time, you can mark on the spool or packaging:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Opening date \/ material model \/ batch<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">and use them on a first-in-first-out basis.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This not only facilitates management, but also makes it easier to trace the material when printing anomalies occur.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Does PP filament need to be dried like nylon?<\/strong><strong><\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Under normal circumstances,<strong>there is no need to frequently dry PP filament the way nylon is dried<\/strong>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Materials such as nylon have a clear moisture-absorption tendency, so moisture usually needs to be controlled more strictly during storage and printing.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">PP&#8217;s situation is different.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If PP filament is stored normally, has a clean surface, and the printing state is stable, it generally does not need frequent drying due to air humidity.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If actual printing anomalies occur, it is also not recommended to directly perform high-temperature drying first.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A more reasonable troubleshooting order is:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Printing parameters \u00e2\u0086\u0092 nozzle \u00e2\u0086\u0092 feeding system \u00e2\u0086\u0092 filament surface condition \u00e2\u0086\u0092 storage environment \u00e2\u0086\u0092 moisture<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This avoids misjudging problems that originally belong to mechanical or parameter issues as &#8220;filament moisture.&#8221;<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>What is the significance of PP&#8217;s low water absorption for 3D printing?<\/strong><strong><\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">For FDM 3D printing, low moisture absorption is a practical advantage of PP.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It means the material&#8217;s sensitivity to environmental humidity during normal storage and use is usually lower than that of highly moisture-absorbing materials such as nylon.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Therefore, when using PP filament, you can focus more attention on:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Printing temperature<\/li>\n\n\n\n<li>Hotbed temperature<\/li>\n\n\n\n<li>Platform attachment<\/li>\n\n\n\n<li>Cooling<\/li>\n\n\n\n<li>Shrinkage and warping<\/li>\n\n\n\n<li>Extrusion stability<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">factors that more directly affect PP printing quality.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For <strong>POLIVE PPpro\u2122<\/strong>, and the actual use should still follow the product&#8217;s corresponding printing parameters and storage recommendations.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Summary<\/strong><strong><\/strong><\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li>PP is a<strong>polymer with very low moisture absorption<\/strong>.<\/li>\n\n\n\n<li>In common references, PP&#8217;s 24-hour water absorption rate is usually at <strong>below 0.03%<\/strong>a low level, but the actual data is affected by material grade and test conditions.<\/li>\n\n\n\n<li>PP filament usually does not need dedicated frequent drying like nylon.<\/li>\n\n\n\n<li>When PP printing shows bubbles, stringing, or extrusion anomalies, do not first assume it is &#8220;moisture exposure&#8221;; first check the temperature, nozzle, feeding system, and filament surface condition.<\/li>\n\n\n\n<li>PP prints have good dimensional stability in general water environments, but the actual performance is still affected by factors such as temperature, media, time, and material formulation.<\/li>\n\n\n\n<li>For water-related mating parts, thermal expansion and contraction caused by temperature may be more worth paying attention to than water absorption.<\/li>\n\n\n\n<li>The focus of daily storage for PP filament is<strong>dust prevention, contamination prevention, light avoidance, and avoiding high temperatures<\/strong>.<\/li>\n\n\n\n<li>Desiccant is usually not a necessity for PP, but can serve as an auxiliary measure during sealed storage.<\/li>\n<\/ul>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n<div id=\"rank-math-faq\" class=\"rank-math-block\">\n<div class=\"rank-math-list\">\n<div id=\"faq-question-polive-3393-1\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\">PP \u7ebf\u6750\u4f1a\u5438\u6c34\u5417\uff1f<\/h3>\n<div class=\"rank-math-answer\">\n\n<p>PP \u5438\u6c34\u7387\u5f88\u4f4e\uff0c\u4e0d\u4f1a\u50cf\u5c3c\u9f99\u90a3\u6837\u660e\u663e\u5438\u6e7f\u589e\u91cd\uff0c\u56e0\u6b64\u4e0d\u9700\u8981\u628a\u70d8\u5e72\u5f53\u6210\u6bcf\u6b21\u6253\u5370\u524d\u7684\u56fa\u5b9a\u52a8\u4f5c\u3002<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-polive-3393-2\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\">\u6253\u5370\u65f6\u51fa\u73b0\u6c14\u6ce1\u3001\u62c9\u4e1d\uff0c\u4e00\u5b9a\u662f\u53d7\u6f6e\u5417\uff1f<\/h3>\n<div class=\"rank-math-answer\">\n\n<p>\u4e0d\u4e00\u5b9a\u3002\u6324\u51fa\u6c14\u6ce1\u6216\u5f02\u54cd\u3001\u62c9\u4e1d\u5782\u6599\u3001\u51fa\u4e1d\u4e0d\u7545\uff0c\u8fd8\u53ef\u80fd\u6765\u81ea\u55b7\u5634\u6b8b\u7559\u3001\u6e29\u5ea6\u504f\u9ad8\u3001\u7ebf\u6750\u8868\u9762\u6cb9\u6c61\u6216\u6599\u76d8\u5361\u6ede\u3002\u5148\u6392\u67e5\u8fd9\u4e9b\uff0c\u522b\u6025\u7740\u70d8\u6599\u3002<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-polive-3393-3\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\">PP \u6253\u5370\u4ef6\u653e\u5728\u6c34\u91cc\u4f1a\u53d8\u5c3a\u5bf8\u5417\uff1f<\/h3>\n<div class=\"rank-math-answer\">\n\n<p>\u901a\u5e38\u5c3a\u5bf8\u548c\u6027\u80fd\u90fd\u6bd4\u8f83\u7a33\u5b9a\uff0c\u5bf9\u4e00\u822c\u6c34\u73af\u5883\u8010\u53d7\u597d\uff0c\u9002\u5408\u6d89\u6c34\u96f6\u4ef6\u548c\u6f6e\u6e7f\u573a\u666f\u3002\u4f46 FDM \u4ef6\u5b58\u5728\u5c42\u95f4\u7f1d\u9699\uff0c\u957f\u671f\u76db\u6c34\u4ecd\u8981\u5148\u8bd5\u6f0f\u3002<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-polive-3393-4\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\">PPpro\u2122 \u7ebf\u6750\u65e5\u5e38\u600e\u4e48\u5b58\uff1f<\/h3>\n<div class=\"rank-math-answer\">\n\n<p>\u5e72\u71e5\u907f\u5149\u3001\u9632\u5c18\u9632\u6cb9\u6c61\u5373\u53ef\uff0c\u5bc6\u5c01\u888b\u662f\u52a0\u5206\u9879\u3002\u4f4e\u5438\u6c34\u6027\u662f\u5b83\u7684\u9690\u85cf\u4f18\u52bf\uff0c\u5b58\u50a8\u8d1f\u62c5\u6bd4 PA\u3001PETG \u5c0f\u5f97\u591a\u3002<\/p>\n\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\"><strong>Related Reading<\/strong><strong><\/strong><\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Are PP Prints Waterproof? How PP Performs in Wet and Water Environments<\/li>\n\n\n\n<li>What to Do When PP Printing Jams? Troubleshooting Steps for Poor Extrusion<\/li>\n\n\n\n<li>How to Store PP Filament? Drying, Sealing, and Everyday-Use Tips<\/li>\n\n\n\n<li>Can PP 3D Printed Parts Hold Boiling Water? POLIVE PPpro\u2122 100\u00b0C Boiling Water Test<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">PP is a<strong>polymer with very low moisture absorption<\/strong>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>","protected":false},"excerpt":{"rendered":"<p>Does PP Absorb Water? Moisture Absorption of PP Filament and Prints PP is apolymer with very low moisture absorption. Because PP&#8217;s molecular structure has relatively low polarity, water molecule &#8230; <a title=\"Does PP Absorb Water? Moisture Absorption of PP Filament and Prints\" class=\"read-more\" href=\"https:\/\/www.polive3d.com\/en\/3393\/\" aria-label=\"Read more about PP \u4f1a\u5438\u6c34\u5417\uff1fPP \u7ebf\u6750\u4e0e\u6253\u5370\u4ef6\u7684\u5438\u6e7f\u8868\u73b0\">Read more<\/a><\/p>","protected":false},"author":1,"featured_media":3394,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[35],"tags":[91,128,67,129,88,130],"class_list":["post-3393","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-35","tag-polypropylene-moisture-absorption","tag-pp-filament-water-absorption","tag-pppro-2","tag-pp","infinite-scroll-item","generate-columns","tablet-grid-50","mobile-grid-100","grid-parent","grid-33"],"_links":{"self":[{"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/posts\/3393","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/comments?post=3393"}],"version-history":[{"count":3,"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/posts\/3393\/revisions"}],"predecessor-version":[{"id":3893,"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/posts\/3393\/revisions\/3893"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/media\/3394"}],"wp:attachment":[{"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/media?parent=3393"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/categories?post=3393"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/tags?post=3393"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}