{"id":3439,"date":"2026-10-12T11:09:44","date_gmt":"2026-10-12T03:09:44","guid":{"rendered":"https:\/\/www.polive3d.com\/?p=3439"},"modified":"2026-11-09T15:20:21","modified_gmt":"2026-11-09T07:20:21","slug":"pp-%e6%89%93%e5%8d%b0%e5%a0%b5%e5%a4%b4%e6%80%8e%e4%b9%88%e5%8a%9e%ef%bc%9f%e6%8c%a4%e5%87%ba%e4%b8%8d%e7%95%85%e7%9a%84%e6%8e%92%e6%9f%a5%e6%ad%a5%e9%aa%a4","status":"publish","type":"post","link":"https:\/\/www.polive3d.com\/en\/pp-%e6%89%93%e5%8d%b0%e5%a0%b5%e5%a4%b4%e6%80%8e%e4%b9%88%e5%8a%9e%ef%bc%9f%e6%8c%a4%e5%87%ba%e4%b8%8d%e7%95%85%e7%9a%84%e6%8e%92%e6%9f%a5%e6%ad%a5%e9%aa%a4\/","title":{"rendered":"What to Do When PP Printing Jams? Troubleshooting Steps for Poor Extrusion"},"content":{"rendered":"<h2 class=\"wp-block-heading\"><strong>What to Do When PP Printing Jams? Troubleshooting Steps for Poor Extrusion<\/strong><strong><\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">PP clogs usually trace to heat creep or uneven extrusion, not the filament. Check hotend cooling, retraction and nozzle cleanliness first.<\/p>\n\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Common Causes at a Glance<\/strong><strong><\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">When PP printing shows poor extrusion, there is usually more than one cause.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Common situations include the following categories.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>1. Foreign objects or material residue<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Inside the nozzle, residue may remain:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Other material used in the previous print<\/li>\n\n\n\n<li>Residue formed by prolonged heating<\/li>\n\n\n\n<li>Dust or other foreign objects<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Especially when switching frequently between different materials, if purging is insufficient, residual material may affect the normal extrusion of subsequent PP.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>2. Low temperature<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">If the nozzle&#8217;s actual temperature is insufficient to keep the material in a stable flow state, melt flow resistance may increase.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">In this case, the following may appear:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Insufficient extrusion volume<\/li>\n\n\n\n<li>Intermittent extrusion<\/li>\n\n\n\n<li>Extruder skipping (gear slipping)<\/li>\n\n\n\n<li>Missing material between layers<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">If the problem becomes more obvious after increasing print speed, also consider whether the hotend&#8217;s melting capacity can meet the higher material flow.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>3. Poor hotend cooling<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Another common issue is <strong>heat creep.<\/strong>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If the cooling system above the hotend malfunctions, heat may spread upward along the hotend, prematurely softening the filament in the feed zone.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This can lead to:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>The filament softens where it shouldn&#8217;t \u2192 feed resistance increases \u2192 extrusion becomes unstable.<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Therefore, if extrusion problems occur, also check the cooling fan and heatsink condition.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>4. Filament slipping<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Sometimes the real problem isn&#8217;t the nozzle at all, but the filament feed mechanism.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For example:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Worn extruder gear<\/li>\n\n\n\n<li>Improper idler wheel pressure<\/li>\n\n\n\n<li>Large amount of filament dust accumulated on the gear<\/li>\n\n\n\n<li>Abnormal filament diameter<\/li>\n\n\n\n<li>Filament crushed or deformed<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">All of these can cause the extruder to fail to push enough material steadily toward the hotend.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If you see the extruder gear repeatedly &#8216;clicking&#8217; and skipping, check the feed mechanism first.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>5. Problems with the filament itself<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The filament&#8217;s condition can also cause feed anomalies.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For example:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Obviously deformed filament<\/li>\n\n\n\n<li>Filament spool sticking together<\/li>\n\n\n\n<li>Contaminated filament<\/li>\n\n\n\n<li>Filament tangled on the spool<\/li>\n\n\n\n<li>Local abnormal filament diameter<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">In this case, even if the nozzle itself isn&#8217;t clogged, the feeding process may encounter abnormal resistance.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>6. Speed and flow mismatch<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">After increasing print speed, the amount of material that must be melted and extruded per unit time also increases.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If the required flow exceeds the hotend&#8217;s actual melting capacity, the following may appear:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Speed increases \u2192 material supply demand rises \u2192 the hotend can&#8217;t melt in time \u2192 insufficient extrusion<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Therefore, if extrusion problems only appear at higher print speeds, don&#8217;t check only the nozzle\u2014also check whether print speed, flow, nozzle temperature, and hotend capacity are properly matched.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>How to Troubleshoot PP Print Jams?<\/strong><strong><\/strong><\/h2>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Step 1: Observe the symptoms first<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">First observe where the problem occurs.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><td><strong>Symptom<\/strong><strong><\/strong><\/td><td><strong>Priority check direction<\/strong><strong><\/strong><\/td><\/tr><tr><td>Extruder keeps skipping<\/td><td>Feed mechanism, feed resistance<\/td><\/tr><tr><td>Gear shows obvious dust<\/td><td>Filament or feed mechanism<\/td><\/tr><tr><td>No material extruding at all<\/td><td>Hotend, nozzle, feeding<\/td><\/tr><tr><td>Intermittent extrusion<\/td><td>Temperature, feeding, local clog<\/td><\/tr><tr><td>Normal at low speed, abnormal at high speed<\/td><td>Temperature, flow, hotend melting capacity<\/td><\/tr><tr><td>Gradually unable to extrude after printing for a while<\/td><td>Hotend cooling, heat creep, clog<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Don&#8217;t conclude &#8216;the nozzle is clogged&#8217; based on a single symptom.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Step 2: Check the feed mechanism<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">First inspect the extruder.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">You can:<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n<li>Loosen the idler wheel.<\/li>\n\n\n\n<li>Check whether the extruder gear has obvious filament dust.<\/li>\n\n\n\n<li>Check whether the idler pressure is appropriate.<\/li>\n\n\n\n<li>Check whether the filament has obvious bite marks.<\/li>\n\n\n\n<li>Cut off a section of filament severely bitten by the gear.<\/li>\n\n\n\n<li>Re-feed and observe the resistance.<\/li>\n<\/ol>\n\n\n\n<p class=\"wp-block-paragraph\">If the feed mechanism itself has a problem, cleaning the nozzle directly may not solve it.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Step 3: Check temperature and cooling<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Confirm that the nozzle temperature shown by the printer is stable.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Also check:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Whether the hotend cooling fan works properly<\/li>\n\n\n\n<li>Whether the heatsink is dusty<\/li>\n\n\n\n<li>Whether the air intake is blocked by dust<\/li>\n\n\n\n<li>Whether heating is stable<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">If the equipment allows, you can also use a suitable temperature-measuring tool to further verify the actual temperature.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Note that different measuring tools may have errors when measuring small metal nozzles, so measured values are better used as auxiliary judgment rather than the sole basis.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Step 4: Clean the hotend<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">If you&#8217;ve confirmed the problem is more likely from the nozzle or hotend, you can try cleaning.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">First, heat the hotend within the temperature range suitable for the material, then try manually pushing clean filament.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If the material extrudes smoothly, the clog may not be severe.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If there is still obvious resistance, depending on the printer and nozzle structure, you can try using <strong>cold pull<\/strong>&nbsp;and other cleaning methods.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The basic idea is:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Heat up \u2192 push in clean filament \u2192 drop to a temperature suitable for cold pull \u2192 pull the filament out<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If done correctly, the end of the pulled-out filament may carry out some residue from inside the nozzle or hotend.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For stubborn clogs, you may need to disassemble the nozzle or hotend for further cleaning per the printer manufacturer&#8217;s maintenance method, and replace related parts if necessary.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">**Image suggestion:** 16:9 landscape, a two-step comparison. Left shows pushing clean filament into the heated hotend; right shows the filament end after cold pull, with a small amount of residue visible. Focus on the operation process; don&#8217;t add exaggerated clogging effects.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Step 5: Reinstall and test<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">After cleaning, don&#8217;t start a large print immediately.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It&#8217;s recommended to first do a short low-speed extrusion or print test, and observe:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Whether extrusion is continuous<\/li>\n\n\n\n<li>Whether line width is stable<\/li>\n\n\n\n<li>Whether obvious missing material appears on the surface<\/li>\n\n\n\n<li>Whether there is still abnormal skipping<\/li>\n\n\n\n<li>Whether the hotend temperature is stable<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">After confirming extrusion has returned to normal, resume formal printing.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>What to Watch Out for After a PP Jam?<\/strong><strong><\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">When cleaning the nozzle, we don&#8217;t recommend forcibly disassembling the hotend without understanding the printer structure.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Different printers have different nozzle, throat, and hotend structures; specific disassembly and maintenance methods should follow the equipment manufacturer&#8217;s instructions.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Pay special attention to high-temperature components.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>The nozzle and hotend reach very high temperatures during operation; avoid direct contact with hot metal parts during cleaning.<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If you need to remove the nozzle or hotend, first confirm the correct maintenance steps for the equipment.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>How to Reduce Recurring PP Jams?<\/strong><strong><\/strong><\/h2>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>1. Purge thoroughly when changing materials<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">When changing materials, purge in a way allowed by the equipment and material to minimize residue of different materials inside the hotend.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Especially when switching between different materials, don&#8217;t assume the nozzle interior is already completely clean.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>2. Keep filament and printer clean<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Dust, oil, and other contaminants on the filament surface may enter the feed path and hotend.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Therefore, besides storing filament properly, also clean regularly:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Extruder gear<\/li>\n\n\n\n<li>Heatsink<\/li>\n\n\n\n<li>Fan<\/li>\n\n\n\n<li>Feed path<\/li>\n<\/ul>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>3. Don&#8217;t keep the nozzle temperature at the low edge<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">If you&#8217;ve confirmed the current low temperature causes unstable extrusion, adjust appropriately within the material&#8217;s recommended range.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Especially after increasing print speed, if extrusion becomes unstable, re-evaluate temperature and flow together.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Don&#8217;t simply think &#8216;higher temperature is always better&#8217;.<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Excessively high temperature can also bring stringing, material degradation, or other printing problems.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>4. Don&#8217;t force-feed when clogged<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">If the hotend is already clearly clogged, continuing to push filament hard doesn&#8217;t guarantee solving the problem.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Excessive mechanical pressure may further deform the filament and increase the burden on the feed mechanism and hotend.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A more reasonable approach is to first determine the clog location, then use a suitable cleaning method.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>5. Prepare common spare parts<\/strong><strong><\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">For users who print frequently, prepare some common spare parts based on the printer model, such as:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Nozzle<\/li>\n\n\n\n<li>Throat (heat break)<\/li>\n\n\n\n<li>Hotend-related seals<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">When the nozzle is indeed damaged or clogged beyond effective cleaning, replacing it directly is often more time-saving than repeated handling.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Is PPpro\u2122 More Prone to Jamming?<\/strong><strong><\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">You can&#8217;t simply judge jam probability from the three words &#8216;PP material.&#8217;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Actual extrusion stability is also affected by:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Material formulation<\/li>\n\n\n\n<li>Nozzle temperature<\/li>\n\n\n\n<li>Print speed<\/li>\n\n\n\n<li>Flow rate<\/li>\n\n\n\n<li>Hotend structure<\/li>\n\n\n\n<li>Feed system<\/li>\n\n\n\n<li>Filament condition<\/li>\n\n\n\n<li>Printer maintenance status<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">and other factors.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Therefore, rather than claiming &#8216;never jams&#8217; or &#8216;never cokes,&#8217; it&#8217;s better to demonstrate through actual test data <strong>the extrusion stability of POLIVE PPpro\u2122 under specific printing conditions<\/strong>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If there is subsequent test data from long-term printing, continuous extrusion, or different print speeds, it can be further added to the article as practical evidence.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Summary<\/strong><strong><\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">When PP printing shows poor extrusion, first don&#8217;t rush to disassemble the nozzle.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Follow this order:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>1. Observe symptoms \u2192 2. Check feeding \u2192 3. Check temperature and cooling \u2192 4. Clean hotend \u2192 5. Low-speed test<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Also distinguish:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Feed slipping<\/strong>does not equal nozzle clogging<\/li>\n\n\n\n<li><strong>Insufficient temperature<\/strong>does not equal hotend clogging<\/li>\n\n\n\n<li><strong>Insufficient extrusion at high speed<\/strong>does not necessarily mean foreign objects in the nozzle<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Only by finding the real cause can you avoid repeatedly cleaning the nozzle without solving the problem.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For PP 3D printing, keeping the filament clean, the feed mechanism normal, and hotend cooling stable, and adjusting temperature and flow based on material and print speed, are important foundations for reducing extrusion problems.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n<div id=\"rank-math-faq\" class=\"rank-math-block\">\n<div class=\"rank-math-list\">\n<div id=\"faq-question-polive-3439-1\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\">PP Extrusion Is Poor \u2014 What Should You Check First?<\/h3>\n<div class=\"rank-math-answer\">\n\n<p>In this order: whether the nozzle has debris or leftover material, whether the temperature is too low, whether the hot end is cooling poorly, whether the filament is slipping during feeding, whether the filament itself is at fault, and whether speed and flow are mismatched. Most clogs are a combination of these.<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-polive-3439-2\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\">How Do You Stop Clogs from Coming Back?<\/h3>\n<div class=\"rank-math-answer\">\n\n<p>Purge properly when changing material, avoid long idle periods at high temperature, keep the filament surface clean, and replace the nozzle when it reaches the end of its life. Also, do not force higher flow by cranking up the temperature \u2014 PP is fairly sensitive to thermal degradation.<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-polive-3439-3\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\">Does PPpro\u2122 Clog More Easily?<\/h3>\n<div class=\"rank-math-answer\">\n\n<p>Low-warp modified PP contains no abrasive reinforcing fillers and is kinder to nozzles. Following an open, room-temperature printing setup usually builds up less residue than repeatedly raising the temperature to chase adhesion.<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-polive-3439-4\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\">What Needs Redoing After Cleaning the Nozzle?<\/h3>\n<div class=\"rank-math-answer\">\n\n<p>Re-check first-layer height and flow, re-calibrate extrusion, and run a small test print to confirm continuous extrusion. Do not start with a large flat base plate \u2014 it wastes time and can mask the problem.<\/p>\n\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\"><strong>Related Reading<\/strong><strong><\/strong><\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li>What Nozzle Should Be Used for PP Printing? Nozzle Wear and Material Selection<\/li>\n\n\n\n<li>How to Store PP Filament? Drying, Sealing, and Everyday-Use Tips<\/li>\n\n\n\n<li>What Print Speed Should Be Set for PP? The Impact of Speed on Print Quality<\/li>\n\n\n\n<li>\u4e3a\u4ec0\u4e48 PP \u4ee5\u524d\u8fd9\u4e48\u96be\u6253\uff1f\u6536\u7f29\u3001\u7fd8\u8fb9\u3001\u7c98\u4e0d\u4f4f\u7684\u4e09\u5927\u96be\u9898<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>","protected":false},"excerpt":{"rendered":"<p>This article details the common causes of poor extrusion in PP printing, covering nozzle residue, feeder abnormalities, and poor hotend cooling, and provides a complete troubleshooting sequence\u2014from inspection and cleaning to re-testing\u2014along with preventive recommendations.<\/p>","protected":false},"author":1,"featured_media":3485,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[35],"tags":[179,178,67,181,182,180],"class_list":["post-3439","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-35","tag-polypropylene-clogging","tag-pp-filament-jam","tag-pppro-2","tag-pp","infinite-scroll-item","generate-columns","tablet-grid-50","mobile-grid-100","grid-parent","grid-33"],"_links":{"self":[{"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/posts\/3439","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/comments?post=3439"}],"version-history":[{"count":5,"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/posts\/3439\/revisions"}],"predecessor-version":[{"id":4017,"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/posts\/3439\/revisions\/4017"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/media\/3485"}],"wp:attachment":[{"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/media?parent=3439"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/categories?post=3439"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.polive3d.com\/en\/wp-json\/wp\/v2\/tags?post=3439"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}