{
    "id": 3835,
    "date": "2026-11-09T10:40:59",
    "date_gmt": "2026-11-09T02:40:59",
    "guid": {
        "rendered": "https:\/\/www.polive3d.com\/en\/pp-printing-no-heated-bed-no-enclosure\/"
    },
    "modified": "2026-11-09T15:19:14",
    "modified_gmt": "2026-11-09T07:19:14",
    "slug": "pp-printing-no-heated-bed-no-enclosure",
    "status": "publish",
    "type": "post",
    "link": "https:\/\/www.polive3d.com\/zh_cn\/pp-printing-no-heated-bed-no-enclosure\/",
    "title": {
        "rendered": "\u4e3a\u4ec0\u4e48 PP \u6253\u5370\u4e0d\u7528\u52a0\u70ed\u5e8a\u3001\u4e5f\u4e0d\u7528\u5c01\u7bb1\uff1f"
    },
    "content": {
        "rendered": "<h2 class=\"wp-block-heading\">Why PP Printing Needs Neither a Heated Bed nor an Enclosure<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Because PP must release heat as it cools. We print PPpro open-frame at room temperature; a brim and PPLOCK26811 handle adhesion, not heat.<\/p>\n\n\n\n\n<p class=\"wp-block-paragraph\">Our own PP printing uses no heated bed and no enclosure. We have printed many models on an open-frame Bambu Lab A1 with the bed at room temperature and the machine fully open, in a stable air-conditioned room. This is not a workaround for a difficult material; it follows from how PP actually cools.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">PP needs to get rid of heat, not take more of it in<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">PP has to absorb and release a large amount of heat as it cools and crystallises. A heated bed keeps feeding heat in from below, and an enclosure traps that heat around the part. Both slow down the cooling the material is trying to complete. What PP wants is a stable, cool ambient that carries heat away evenly, which is why an air-conditioned room with the door and lid open lets parts set faster and more uniformly than a sealed, heated chamber.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Adhesion: a brim plus PPLOCK26811<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Instead of using heat to hold the first layer down, we add a generous brim to enlarge the contact area and coat the build plate with PPLOCK26811 adhesive. Apply a thin, even layer, wait a few minutes until it dries, then print directly on top of it. One application lasts for multiple prints, and the plate cleans up with a wipe of alcohol. No heated bed, no PP tape, no special build surface.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Warping is solved in the design<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Corner lift comes from stress concentration and uneven shrinkage, so we remove the causes in the model rather than adding hardware: replace right-angle corners with rounded fillets, add thickened mouse ears at the corners, enlarge the bottom contact area, and keep wall thickness as uniform as possible. Combined with a brim and PPLOCK26811, the part stays flat without any extra heat.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">What this means in practice<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">On a desktop open-frame printer such as the Bambu Lab A1, the working recipe is simple: heated bed off, enclosure off, a stable air-conditioned room, a brim, one coat of PPLOCK26811, and a part designed with fillets and even walls. The usual PP checklist of a hot bed, a sealed chamber and PP tape tries to fight shrinkage by adding heat. Our experience goes the other way, and that is the whole point.<\/p>\n\n\n<div id=\"rank-math-faq\" class=\"rank-math-block\">\n<div class=\"rank-math-list\">\n<div id=\"faq-question-pppro-zh-1\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\">PP \u6253\u5370\u771f\u7684\u9700\u8981\u52a0\u70ed\u5e8a\u5417\uff1f<\/h3>\n<div class=\"rank-math-answer\">\n\n<p>\u4e0d\u9700\u8981\u3002\u6211\u4eec\u5b9e\u64cd\u6253\u5370\u5168\u7a0b\u5173\u95ed\u52a0\u70ed\u5e8a\u3001\u7528\u5e38\u6e29\u5e73\u53f0\uff0c\u5728\u5f00\u653e\u5f0f\u7684 Bambu Lab A1 \u4e0a\u4e5f\u6253\u4e86\u5f88\u591a\u6a21\u578b\u3002PP \u51b7\u5374\u7ed3\u6676\u65f6\u8981\u5438\u6536\u5e76\u91ca\u653e\u5927\u91cf\u70ed\u91cf\uff0c\u4ece\u4e0b\u65b9\u7ee7\u7eed\u8865\u70ed\u5e76\u4e0d\u80fd\u5e2e\u52a9\u5b9a\u578b\uff0c\u771f\u6b63\u9700\u8981\u7684\u662f\u7a33\u5b9a\u3001\u504f\u51c9\u3001\u80fd\u628a\u70ed\u91cf\u5747\u5300\u5e26\u8d70\u7684\u73af\u5883\u3002\u52a0\u70ed\u5e8a\u4e0d\u5728\u6211\u4eec\u7684\u6d41\u7a0b\u91cc\u3002<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-pppro-zh-2\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\">\u4e3a\u4ec0\u4e48\u53cd\u800c\u8981\u5f00\u7bb1\uff08\u5f00\u653e\u673a\u67b6\uff09\u6253\u5370\u3001\u4e0d\u5c01\u7bb1\uff1f<\/h3>\n<div class=\"rank-math-answer\">\n\n<p>\u5c01\u7bb1\u4f1a\u628a\u70ed\u91cf\u56f0\u5728\u96f6\u4ef6\u5468\u56f4\u3002PP \u51b7\u5374\u65f6\u8981\u6563\u6389\u5927\u91cf\u70ed\u91cf\uff0c\u95f7\u7740\u4f1a\u62d6\u6162\u7ed3\u6676\u3001\u53cd\u800c\u5f71\u54cd\u5c3a\u5bf8\u7a33\u5b9a\u3002\u5728\u7a7a\u8c03\u623f\u91cc\u5f00\u95e8\u5f00\u76d6\u3001\u5f00\u653e\u673a\u67b6\u6253\u5370\uff0c\u6563\u70ed\u66f4\u5feb\u66f4\u5747\u5300\u2014\u2014\u6240\u4ee5\u54ea\u6015\u5728\u684c\u9762\u673a\u4e0a\uff0c\u6211\u4eec\u4e5f\u662f\u5168\u5f00\u653e\u3001\u4e0d\u5c01\u7bb1\u3001\u4e0d\u52a0\u70ed\u5e8a\u3002<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-pppro-zh-3\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\">\u4e0d\u7528\u52a0\u70ed\u5e8a\uff0cPP \u600e\u4e48\u7c98\u5f97\u4f4f\u5e73\u53f0\uff1f<\/h3>\n<div class=\"rank-math-answer\">\n\n<p>\u4e24\u6837\u4e1c\u897f\uff1a\u88d9\u8fb9\u548c PPLOCK26811\u3002\u5148\u52a0\u5bbd\u88d9\u8fb9\u6269\u5927\u9996\u5c42\u63a5\u89e6\u9762\u79ef\uff0c\u518d\u5728\u5e73\u53f0\u4e0a\u8584\u8584\u5747\u5300\u6d82\u4e00\u5c42 PPLOCK26811 \u4e13\u7528\u80f6\u6c34\uff0c\u7b49\u51e0\u5206\u949f\u5e72\u900f\uff0c\u76f4\u63a5\u5728\u4e0a\u9762\u6253\u5370\u5373\u53ef\u3002\u4e00\u6b21\u6d82\u62b9\u53ef\u652f\u6491\u591a\u6b21\u6253\u5370\uff0c\u4e0d\u7528\u6bcf\u6b21\u91cd\u6d82\uff1b\u8981\u6e05\u6d01\u65f6\u7528\u9152\u7cbe\u64e6\u4e00\u4e0b\u5c31\u884c\u3002\u4e0d\u9700\u8981\u52a0\u70ed\u5e8a\u3001PP \u80f6\u5e26\u6216\u4e13\u7528\u5e73\u53f0\u3002<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-pppro-zh-4\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\">\u4e0d\u52a0\u70ed\u3001\u4e0d\u5c01\u7bb1\uff0c\u7fd8\u8fb9\u600e\u4e48\u89e3\u51b3\uff1f<\/h3>\n<div class=\"rank-math-answer\">\n\n<p>\u9760\u8bbe\u8ba1\u89e3\u51b3\uff0c\u4e0d\u9760\u786c\u4ef6\u3002\u76f4\u89d2\u6539\u5706\u89d2\u3001\u89d2\u843d\u52a0\u5e95\u90e8\u52a0\u539a\u7684\u8001\u9f20\u8033\u6735\u3001\u589e\u5927\u5e95\u90e8\u63a5\u89e6\u9762\u79ef\u3001\u58c1\u539a\u5c3d\u91cf\u5747\u5300\u2014\u2014\u8fd9\u4e9b\u624b\u6bb5\u6d88\u9664\u4e86\u5e94\u529b\u96c6\u4e2d\u548c\u6536\u7f29\u4e0d\u5747\uff0c\u7fd8\u8fb9\u7684\u6839\u56e0\u5c31\u6ca1\u4e86\u3002\u518d\u914d\u5408\u88d9\u8fb9\u548c PPLOCK26811\uff0c\u6253\u5370\u5f00\u59cb\u524d\u7fd8\u8fb9\u5c31\u5df2\u7ecf\u88ab\u5904\u7406\u6389\u4e86\u3002<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-pppro-zh-5\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\">\u5165\u95e8\u5f00\u653e\u5f0f\u673a\u5668\uff08\u6bd4\u5982 Bambu A1\uff09\u771f\u80fd\u6253 PP \u5417\uff1f<\/h3>\n<div class=\"rank-math-answer\">\n\n<p>\u80fd\u3002\u6211\u4eec\u5728 Bambu A1 \u4e0a\u5173\u6389\u52a0\u70ed\u5e8a\u3001\u5168\u5f00\u653e\u72b6\u6001\u4e0b\u6253\u4e86\u5f88\u591a\u6a21\u578b\u3002\u5173\u952e\u5c31\u51e0\u4ef6\u4e8b\uff1a\u7a33\u5b9a\u7684\u7a7a\u8c03\u623f\u73af\u5883\u3001\u5747\u5300\u51b7\u5374\u3001\u52a0\u88d9\u8fb9\u3001\u6d82\u4e00\u6b21 PPLOCK26811\u3001\u628a\u96f6\u4ef6\u8bbe\u8ba1\u505a\u5bf9\u3002\u4e0d\u9700\u8981\u5c01\u95ed\u5f0f\u5de5\u4e1a\u673a\uff0c\u4e5f\u4e0d\u9700\u8981\u52a0\u70ed\u8154\u4f53\u3002<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-pppro-zh-6\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\">PPLOCK26811 \u6d82\u4e00\u6b21\u80fd\u7528\u591a\u4e45\uff1f\u5e73\u53f0\u600e\u4e48\u6e05\u6d01\uff1f<\/h3>\n<div class=\"rank-math-answer\">\n\n<p>\u4e00\u6b21\u6d82\u62b9\u53ef\u4ee5\u591a\u6b21\u6253\u5370\u3002\u9996\u6b21\u6253\u5370\u524d\u7b49\u51e0\u5206\u949f\u5e72\u900f\uff0c\u4e4b\u540e\u76f4\u63a5\u5f80\u4e0a\u6253\u5373\u53ef\uff0c\u6bcf\u6b21\u4e4b\u95f4\u4e0d\u7528\u91cd\u6d82\u3002\u60f3\u6362\u65b0\u8868\u9762\u65f6\u7528\u9152\u7cbe\u64e6\u4e00\u904d\u5c31\u884c\u2014\u2014\u4e0d\u7528\u522e\u3001\u4e0d\u7528\u5f3a\u6eb6\u5242\u3001\u4e0d\u7528\u6bcf\u6b21\u6253\u5370\u524d\u8865\u6d82\u3002<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-pppro-zh-7\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\">\u4e3a\u4ec0\u4e48\u5e38\u89c4 PP \u6253\u5370\u90a3\u5957\u505a\u6cd5\u5728\u8fd9\u91cc\u4e0d\u9002\u7528\uff1f<\/h3>\n<div class=\"rank-math-answer\">\n\n<p>\u5e38\u89c4\u5efa\u8bae\uff0880\u2013100\u00b0C \u70ed\u5e8a\u3001\u5bc6\u5c01\u5c01\u7bb1\u3001PP \u80f6\u5e26\uff09\u662f\u7ed9\u666e\u901a PP \u7ebf\u6750\u5199\u7684\uff0c\u601d\u8def\u662f\u9760\u52a0\u70ed\u53bb\u5bf9\u6297\u6536\u7f29\u3002\u6211\u4eec\u7684\u5b9e\u64cd\u76f8\u53cd\uff1aPP \u7ed3\u6676\u65f6\u9700\u8981\u628a\u70ed\u91cf\u6563\u51fa\u53bb\uff0c\u6240\u4ee5\u5728\u7a33\u5b9a\u7684\u7a7a\u8c03\u623f\u91cc\u5f00\u653e\u673a\u67b6\u3001\u5e38\u6e29\u5e73\u53f0\u6253\u5370\uff1b\u7c98\u9644\u548c\u7fd8\u8fb9\u4ea4\u7ed9\u88d9\u8fb9\u3001PPLOCK26811 \u548c\u96f6\u4ef6\u8bbe\u8ba1\u3002\u628a\u70ed\u91cf\u518d\u52a0\u56de\u53bb\uff0c\u662f\u8ddf\u6750\u6599\u5bf9\u7740\u5e72\uff0c\u4e0d\u662f\u987a\u7740\u5b83\u3002<\/p>\n\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\"><strong>Related Reading<\/strong><strong><\/strong><\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li><a href=\"https:\/\/www.polive3d.com\/en\/pppro-%e6%98%af%e4%bb%80%e4%b9%88%ef%bc%9f%e4%b8%80%e6%ac%be%e4%b8%8d%e7%94%a8%e7%83%ad%e5%ba%8a%e3%80%81%e8%83%bd%e5%81%9a%e6%b4%bb%e9%93%b0%e9%93%be%e7%9a%84%e6%94%b9%e6%80%a7-pp-3d-%e6%89%93\/\" data-type=\"post\" data-id=\"3718\">What Is PPpro? A Modified PP 3D Printing Filament That Needs No Heated Bed and Makes Living Hinges<\/a><\/li>\n\n\n\n<li><a href=\"https:\/\/www.polive3d.com\/en\/pp-%e6%89%93%e5%8d%b0%e6%97%b6%e9%9c%80%e8%a6%81%e5%b0%81%e9%97%ad%e4%bb%93%e5%90%97%ef%bc%9fpppro-%e5%bc%80%e6%94%be%e5%bc%8f%e6%89%93%e5%8d%b0%e5%ae%9e%e6%b5%8b\/\" data-type=\"post\" data-id=\"3241\">Does PP printing need an enclosure? Open-frame printing test with POLIVE PPpro\u2122<\/a><\/li>\n\n\n\n<li><a href=\"https:\/\/www.polive3d.com\/en\/pp-%e6%89%93%e5%8d%b0%e9%9c%80%e8%a6%81%e5%a4%9a%e9%ab%98%e7%9a%84%e7%83%ad%e5%ba%8a%e6%b8%a9%e5%ba%a6%ef%bc%9f%e7%83%ad%e5%ba%8a%e8%ae%be%e7%bd%ae%e6%80%9d%e8%b7%af\/\" data-type=\"post\" data-id=\"3410\">Does PP Printing Need a Heat Bed? Room-Temperature Printing and Cooling Setup<\/a><\/li>\n\n\n\n<li><a href=\"https:\/\/www.polive3d.com\/en\/pp-%e6%89%93%e5%8d%b0%e6%80%8e%e4%b9%88%e9%98%b2%e7%bf%98%e8%be%b9%ef%bc%9fbrim%e3%80%81raft-%e4%b8%8e%e8%a3%99%e8%be%b9%e6%80%8e%e4%b9%88%e9%80%89-url-slug\/\" data-type=\"post\" data-id=\"3416\">How to Prevent PP Warping? How to Choose Between Brim, Raft, and Skirt<\/a><\/li>\n\n\n\n<li><a href=\"https:\/\/www.polive3d.com\/en\/3d-%e6%89%93%e5%8d%b0-pp-%e4%bb%b6%e6%80%8e%e4%b9%88%e8%ae%be%e8%ae%a1%ef%bc%9f%e5%a3%81%e5%8e%9a%e3%80%81%e5%9c%86%e8%a7%92%e3%80%81%e5%8d%a1%e6%89%a3%e4%b8%8e%e9%98%b2%e5%8f%98%e5%bd%a2%e6%8a%80\/\" data-type=\"post\" data-id=\"3710\">How to Design PP Parts for 3D Printing? Wall Thickness, Fillets, Snap Fits and Warp Prevention<\/a><\/li>\n\n\n\n<li><a href=\"https:\/\/www.polive3d.com\/en\/pp-3d-%e6%89%93%e5%8d%b0%e7%94%a8%e4%bb%80%e4%b9%88%e6%89%93%e5%8d%b0%e5%b9%b3%e5%8f%b0%ef%bc%9f%e5%b8%b8%e8%a7%81%e5%b9%b3%e5%8f%b0%e6%9d%90%e6%96%99%e5%af%b9%e6%af%94\/\" data-type=\"post\" data-id=\"3407\">What Print Bed Should Be Used for PP 3D Printing? A Comparison of Common Bed Materials<\/a><\/li>\n\n\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>",
        "protected": false
    },
    "excerpt": {
        "rendered": "<p>Why PP Printing Needs Neither a Heated Bed nor an Enclosure Because PP must release heat as it cools. We print PPpro open-frame at room temperature; a brim and PPLOCK26811 handle adhesion, not heat. O &#8230; <a title=\"\u4e3a\u4ec0\u4e48 PP \u6253\u5370\u4e0d\u7528\u52a0\u70ed\u5e8a\u3001\u4e5f\u4e0d\u7528\u5c01\u7bb1\uff1f\" class=\"read-more\" href=\"https:\/\/www.polive3d.com\/zh_cn\/pp-printing-no-heated-bed-no-enclosure\/\" aria-label=\"\u9605\u8bfb \u4e3a\u4ec0\u4e48 PP \u6253\u5370\u4e0d\u7528\u52a0\u70ed\u5e8a\u3001\u4e5f\u4e0d\u7528\u5c01\u7bb1\uff1f\">\u9605\u8bfb\u66f4\u591a<\/a><\/p>",
        "protected": false
    },
    "author": 1,
    "featured_media": 0,
    "comment_status": "open",
    "ping_status": "open",
    "sticky": false,
    "template": "",
    "format": "standard",
    "meta": {
        "footnotes": ""
    },
    "categories": [
        35
    ],
    "tags": [],
    "class_list": [
        "post-3835",
        "post",
        "type-post",
        "status-publish",
        "format-standard",
        "hentry",
        "category-35",
        "infinite-scroll-item",
        "generate-columns",
        "tablet-grid-50",
        "mobile-grid-100",
        "grid-parent",
        "grid-33"
    ],
    "_links": {
        "self": [
            {
                "href": "https:\/\/www.polive3d.com\/zh_cn\/wp-json\/wp\/v2\/posts\/3835",
                "targetHints": {
                    "allow": [
                        "GET"
                    ]
                }
            }
        ],
        "collection": [
            {
                "href": "https:\/\/www.polive3d.com\/zh_cn\/wp-json\/wp\/v2\/posts"
            }
        ],
        "about": [
            {
                "href": "https:\/\/www.polive3d.com\/zh_cn\/wp-json\/wp\/v2\/types\/post"
            }
        ],
        "author": [
            {
                "embeddable": true,
                "href": "https:\/\/www.polive3d.com\/zh_cn\/wp-json\/wp\/v2\/users\/1"
            }
        ],
        "replies": [
            {
                "embeddable": true,
                "href": "https:\/\/www.polive3d.com\/zh_cn\/wp-json\/wp\/v2\/comments?post=3835"
            }
        ],
        "version-history": [
            {
                "count": 2,
                "href": "https:\/\/www.polive3d.com\/zh_cn\/wp-json\/wp\/v2\/posts\/3835\/revisions"
            }
        ],
        "predecessor-version": [
            {
                "id": 3973,
                "href": "https:\/\/www.polive3d.com\/zh_cn\/wp-json\/wp\/v2\/posts\/3835\/revisions\/3973"
            }
        ],
        "wp:attachment": [
            {
                "href": "https:\/\/www.polive3d.com\/zh_cn\/wp-json\/wp\/v2\/media?parent=3835"
            }
        ],
        "wp:term": [
            {
                "taxonomy": "category",
                "embeddable": true,
                "href": "https:\/\/www.polive3d.com\/zh_cn\/wp-json\/wp\/v2\/categories?post=3835"
            },
            {
                "taxonomy": "post_tag",
                "embeddable": true,
                "href": "https:\/\/www.polive3d.com\/zh_cn\/wp-json\/wp\/v2\/tags?post=3835"
            }
        ],
        "curies": [
            {
                "name": "wp",
                "href": "https:\/\/api.w.org\/{rel}",
                "templated": true
            }
        ]
    }
}